SCOOBY

FiveM Graphics packs & textures Installation Guide

Browse resources ↗

FIVEM

Install FiveM graphics packs and textures

  1. Open the listing’s author page and choose the FiveM release. Check whether it is a client graphics pack, a ReShade preset, or a server-streamed resource.
  2. For a client graphics pack, close FiveM, extract the archive, and follow the author’s installation path. For example, Hiromasa documents %LOCALAPPDATA%/FiveM/FiveM.app/plugins for its packs. Keep a backup of any files you replace.
  3. For a ReShade preset, install the required shaders and any named base mod, such as QuantV. Put the preset .ini in your ReShade presets folder and select it in the overlay.
  4. For a server-streamed package such as Oulsen’s satellite map, have the server operator keep the manifest and stream files together, add the resource to the server’s resources directory, and enable it in server.cfg.

Cfx.re documents that client graphics mods are unavailable in FiveM for GTA V Enhanced during early access. Check the game edition and the server’s client-mod policy before installing.

Cfx.re compatibility notes → Browse FiveM graphics packs and textures →

FIVEM

Compare graphics packs and check performance

  1. Start with stock graphics and take a baseline in a private test session. Keep the same location, camera angle, resolution and game settings for both passes.
  2. Check the same street in clear daylight, at dusk and at night. In daylight, look for detail in white walls, clouds and signs. At dusk, check for lost detail in shaded doorways. At night, check whether streetlights bloom over road markings or make the HUD hard to read.
  3. Walk the same route and pan past fences, foliage and signs. These fine details make shimmer, ghosting and oversharpening easier to spot. At a waterfront, check that the sunset reflection keeps detail around the brightest part.
  4. Repeat the route with one pack or preset changed. Compare frame times and visible stutter along with average FPS. A clip recorded on a different server or at a different time of day is useful for judging the look, but cannot establish a performance gain.

If the result looks wrong or FiveM crashes, close the game, roll back the last change and retest the stock setup before adding anything else.

FIVEM

Measure what an FPS pack changes

  1. Press F8 to open the FiveM console and run cl_drawperf true. The overlay shows FPS and GPU usage. Keep your resolution, frame cap and graphics settings fixed during the comparison.
  2. Choose a route on a test server you control. First compare the stock client and the pack at the same time of day and in the same weather. Then repeat in a second condition, such as at night, to check whether the result holds when lighting changes.
  3. Let the scene load before recording your readings. Run the same route twice for each setup and note FPS during movement and any recurring stutter. Check whether any improvement comes with changes to shadow detail, reflections or road textures that matter to you.
  4. Run cl_drawperf false when you finish. Keep your measurements with your settings so you can repeat the comparison after changing the pack.
Cfx.re performance overlay commands →

FIVEM

Check whether your FiveM client supports the old custom crosshair

In September 2026, Cfx removed its crosshair guide and the drawing code from the FiveM source repository. The old commands may be unavailable on your installed build.

  1. On a test server you administer, or in FiveM single-player, press F8 and enter cl_customCrosshair by itself. If the console returns a setting, record its value and try cl_customCrosshair true. If the setting is unknown or the reticle never appears, use the game’s available HUD options.
  2. If the reticle appears, try cl_crosshairsize 3 for line length and cl_crosshair_drawoutline true for an outline. Record the original values before changing them. Compare the result on a bright wall and against a dark background at the resolution you play at.
  3. Restore the values you recorded. To disable the old custom reticle, use cl_customCrosshair false on builds that support it. If a server disables the setting, follow the server’s HUD rules.

PNG and GIF crosshair packs are image files. The old F8 commands draw a reticle from settings such as line length and color. For a server HUD that supports images, use the file format and dimensions its maintainer specifies.

Archived Cfx crosshair reference → Cfx source change →

FIVEM

Test sky colors, timecycles and vehicle lights

  1. Decide who should see the change. A client timecycle pack changes the view on your installation. For vehicle lighting that players should share, have the server operator test a compatible server resource.
  2. Choose the FiveM package on the maintainer’s page. For VisualVanilla, that is 2.0 for FiveM (FINAL) in All Versions. For U1D GFX Core, choose FiveM 1.0.0. Follow the selected package’s written instructions.
  3. Hold the camera still on a test server and compare the same weather and time with the pack on and off. Then advance from daylight to dusk to see how the colors blend. Check cloud edges, street markings and building shadows. A striking sky at one hour can look very different during the transition.
  4. For server lighting, have a second player join the test server and look at the same vehicle at night. If the lights are too bright or differ between clients, check which server resources and client presets affect lighting. Test one change at a time.
Browse FiveM sky and lighting packs →

FIVEM

Load and tune a ReShade preset

  1. On a compatible FiveM Legacy setup where the server allows ReShade, save the preset .ini in the presets folder named by its author. Keep your current preset as a separate file.
  2. Open the ReShade overlay and select the new file from the preset selector on the Home tab. If an effect fails to load, check the author’s shader list and the overlay log. In a preset, the Techniques line can help you identify missing .fx files.
  3. Compare effects on and off from the same camera angle. If shadows look flat or signs lose detail, try adjusting the color or contrast effect first. If pavement and brick edges look grainy while moving, turn down sharpening and check whether more than one sharpening effect is active.
  4. Save your changes to a copy. If the overlay never appears, check your game edition and the server’s policy before changing anything else.
ReShade preset instructions →

FIVEM

Tell a preset from a full client pack

  • A ReShade preset is typically an .ini with a list of shader dependencies. Load it through your compatible ReShade installation and keep your previous preset so you can switch back.
  • A pack with a citizen folder can replace client files. Check the archive against the maintainer’s file list and game edition before changing anything. If the archive includes runtime DLLs or has no original release, skip it and choose a documented pack.
  • An archive labelled DLSS may bundle ReShade and third-party DLLs. Upscaling, frame generation and neural rendering have different hardware requirements. Check the original project’s compatibility notes for your exact GPU and edition before installing; a filename naming a GPU series is insufficient. Cfx.re says graphics mods are unavailable on FiveM Enhanced during early access.

Check the server’s client plugin policy first. To troubleshoot a compatible pack, start with the stock client, add one documented component at a time and back up the exact files you replace.

Cfx.re client plugin guidance →

FIVEM

Set up a mixed FiveM pack one component at a time

  1. Open the archive outside FiveM and check its folder tree. A bundle can put a ReShade preset, audio replacements and a citizen folder under a single wrapper directory. Open any nested archive separately and match each component to its original maintainer’s instructions and supported edition.
  2. Close FiveM. Confirm the path to your active installation before changing files. Cfx.re’s installer normally uses %LOCALAPPDATA%\FiveM and can also install into a folder you choose. Write down the files each component adds or replaces and keep copies of the originals outside the game folders.
  3. Try the component you want first. Launch FiveM and test it before adding the next one. If two components name the same destination file, choose one unless the maintainer provides a combined version. To compare a dramatic color grade or night sky, check whether the HUD and light surfaces stay readable during ordinary play. Montage cuts and slow motion make it hard to judge how a preset behaves live.
  4. If a change causes a crash, missing audio or a modified-file error, close FiveM, remove the files that change added and restore the copies you made. Launch again with the restored setup. If you no longer have the original files, use the official support instructions for the affected installation.
Cfx.re installation paths → Cfx.re client troubleshooting →